Epson p10000 - Margins Appear in Borderless Prints; Too Much Ink Is Consumed

206
• Depending on the print density and type of paper you are using, the ink may take a while to dry. Do not
stack prints until the ink is completely dry.
• Clean around the print head.
Parent topic: Solving Print Quality Problems
Related references
Paper Menu Settings
Setup Menu Settings
Related tasks
Creating Paper Configurations
Cleaning Around the Print Head
Margins Appear in Borderless Prints
If borderless prints still have margins, try these solutions:
• Check the print settings selected in your print application you are using, as well as the printer driver.
• Make sure that the paper settings on the LCD screen match the paper you loaded.
• Paper that is stored incorrectly may expand or contract. Make sure you have stored the paper
according to the manufacturer's specifications.
• Check that the paper you are using supports borderless printing.
• If you are using roll paper, change the Adjust Cut Position setting. This may reduce the margins at
the top and bottom of the print.
Parent topic: Solving Print Quality Problems
Related references
Maintenance Menu Settings
Paper Menu Settings
Borderless Paper Type Compatibility
Related tasks
Selecting Roll Paper Settings - Mac
Too Much Ink is Consumed
If your printer is consuming too much ink during printing, try these solutions:
• Make sure you selected the Media Type setting in the printer driver that matches the paper you
loaded in the printer. The amount of ink used during printing is controlled by the Media Type setting.