165
Aligning the Print Head Manually Using the Product Control Panel
You can manually align the print head using the control panel on your product.
1. Load roll paper or cut sheet paper in this size or larger: A4 (8.3 × 11.7 inches [210 × 297 mm]).
2. Make sure the correct paper type is selected.
3. Press the maintenance button.
4. Select Head Alignment and press the OK button.
5. Select Manual (Bi-D) and press the right arrow button.
6. Press the OK button.
The alignment sheet prints.
Note: When aligning on cut sheet paper, the alignment sheet is printed across multiple pages. Once
the first sheet prints, load another sheet of paper.
7. After each alignment sheet is printed, view the LCD screen for instructions on selecting the best
pattern in each set.
8. Check the printed patterns and choose the number representing the pattern in which the white lines
are the most evenly spaced. Then press the OK button.
Parent topic: Print Head Alignment
Related references
Maintenance Menu Settings
To Next Page
Loading...
