23
8. Push down the adapter lock levers.
9. Lift the roll and slide it to the right until it meets the roll paper guide. Then slide the roll forward.
10. Press the load/remove paper button.
11. Make sure Roll Paper is selected and press the OK button.
12. Insert the leading edge of the roll paper into the feed slot until the printer beeps.
Note: If the Auto Loading setting is set to Off, continue feeding the paper until it reaches the front
edge of the printer.
Note: If the cloth in the paper slot lifted up when paper was removed, press the cloth down with the
leading edge of the paper.
To Next Page
Loading...
