38
7. Select a paper preset that is similar to the paper that you loaded and press the OK button.
Note: Use the following guidelines when selecting the reference paper that is closest to the paper
you are using:
• Glossy paper: Photo Paper or Proofing Paper.
• Thick paper (non-glossy): Matte Paper.
• Thin, soft paper (non-glossy): Plain Paper.
• Cotton paper with a rough surface: Fine Art Paper.
• Special media such as film, cloth, poster board, or tracing paper: Others.
8. Select Platen Gap and press the OK button.
9. Select a platen gap setting and press the OK button.
Note: When you use a custom paper configuration, you cannot adjust the Platen Gap setting from
the Printer Setup menu.
10. Select Paper Thickness and press the OK button.
11. Press the OK button.
A paper thickness pattern prints.
12. Check the printed pattern and locate the pattern with the most evenly overlapping lines.
13. Select the number of the most even pattern and press the OK button.
14. Select any additional settings in the Custom Paper Settings menu, as necessary.
15. When you finish, press back to exit the menu.
After you create paper configurations, you can print a list of the presets and the settings for each one.
Printing a Paper Configuration List
Selecting Custom Paper Configurations
To Next Page
