60
The Image Quality is Rough
• Set the Epson ScanSmart mode according to the original you want to scan. To scan documents, use
the Document Mode settings. For scanning photos, use the Photo Mode settings.
• When you are using Document Mode or Photo Mode in Epson ScanSmart, use the image quality
adjustment features on the Advanced Settings tab on the Scan Settings screen.
• If the resolution is low, try increasing the resolution and then scanning.
• The scanned image quality may differ from the original you scanned.
Parent topic: Solving Scanned Image Quality Problems
Spots or Lines Appear in All Scanned Images
If spots or lines appear in all your scanned images, try these solutions:
• Clean the scanner glass and document mat.
• Remove any dust from the scanned image.
• If lines or spots continue, contact Epson Support.
Parent topic: Solving Scanned Image Quality Problems
Straight Lines in an Image Appear Crooked
If straight lines in an original appear crooked in a scanned image, try these solutions:
• Make sure to place your original straight when you scan it.
Parent topic: Solving Scanned Image Quality Problems
Text or Images are Blurry
If a scanned image appears distorted or blurry, try these solutions:
• Make sure your original is not wrinkled or warped. This may prevent the original from laying flat when
passing over the scanner sensors.
• Do not move your original or your scanner during scanning.
• Your product will not operate properly while tilted at an angle. Place your product on a flat, stable
surface that extends beyond its base in all directions.
• When using Document Mode or Photo Mode in Epson ScanSmart, change the Resolution on the
Main Settings tab on the Scan Settings screen, and then scan again.