Epson PowerLite 4300 User Manual

Registering and deleting projectors for monitoring
11
Registering projectors using automatic search
(Searching for and registering projectors that are
located in the same segment)
Procedures for automatic search
Procedure
A Right-click in Grouping view and select "New" - "Projector
(automatic search)".
The following Create new projector (automatic registration) win-
dow will be displayed.
If Detail list view is displayed, select New - Projector (automatic
search) from the Edit menu.
q
You can also carry out this operation by selecting New - Projector
(automatic search) from the Edit menu.
B Click "Search".
Automatic searching will be carried out, and the names of the pro-
jectors that have been detected will be displayed.
If a projector does not appear in the list, use "Registration by spec-
ifying an IP address (Manual registration)". s p.16
q
Projectors that are using a serial W TCP/IP conversion adapter cannot be
detected.

Epson PowerLite 4300 Specifications

Display

native resolution	1024 x 768
aspect ratio	Supports 4:3, 16:9, 16:10
color light output	5200 lumens

Power

power supply voltage	100 – 240 V ±10%, 50/60 Hz AC
power consumption normal mode	464 W
power consumption ECO mode	383 W

Operating Environment

operating temperature	32 ˚ to 104 ˚F (0 ˚ to 40 ˚C)
fan noise normal mode	38 dB
fan noise ECO mode	32 dB

Weight and Dimensions

dimensions including feet	18.50" x 12.26" x 5.96"
dimensions excluding feet	18.5" x 12.26" x 5.31"
weight	15 lb