Epson PowerLite 4300 User Manual

Registering and deleting projectors for monitoring
16
B After entering the details, click "Register" to start the
registration. When the message is displayed, click "OK".
To continue registering other projector(s), repeat Steps 1 and 2.
C To end the registration operation, click in the top-right
corner of the window or click "Cancel".
The icon(s) of the projector(s) you registered will be displayed in
Grouping view or Detail list view.
Refer to s "Monitoring window layout" p.20 for details on using
the Grouping view and Detail list view.
Registration by specifying an IP address (Manual
registration)
Procedure
A Right-click in Grouping view and select "New" - "Projector
(manual registration)".
The following window will be displayed.
If Detail list view is displayed, select New - Projector (manual reg-
istration) from the Edit menu.

Epson PowerLite 4300 Specifications

Display

native resolution	1024 x 768
aspect ratio	Supports 4:3, 16:9, 16:10
color light output	5200 lumens

Power

power supply voltage	100 – 240 V ±10%, 50/60 Hz AC
power consumption normal mode	464 W
power consumption ECO mode	383 W

Operating Environment

operating temperature	32 ˚ to 104 ˚F (0 ˚ to 40 ˚C)
fan noise normal mode	38 dB
fan noise ECO mode	32 dB

Weight and Dimensions

dimensions including feet	18.50" x 12.26" x 5.96"
dimensions excluding feet	18.5" x 12.26" x 5.31"
weight	15 lb