Power light Lamp light Temperature Filter light Status and solution
light
On Off Off Flashing Low air flow through the projector.
orange
• Make sure that the vents and air filter are
not clogged with dust or obstructed by
nearby objects.
• Clean or replace the air filter.
• If the problem persists, unplug the projector
and contact Epson for help.
On Off Off Orange No air filter. Check to see if the air filter is
securely installed.
Red Off Off Red Low air flow through the air filter.
• Make sure that the vents and air filter are
not clogged with dust or obstructed by
nearby objects.
• Clean or replace the air filter.
• If the problem persists, unplug the projector
and contact Epson for help.
On Flashing Off Off The lamp is past its replacement period and
orange needs to be replaced to avoid damage. Do
not continue using the projector.
Red Off Flashing red Off A fan or sensor has a problem. Turn the
projector off, unplug it, and contact Epson for
help.
Red or Flashing Flashing red Off Internal projector error or air exhaust vent
flashing red red error. Turn the projector off, unplug it, and
contact Epson for help.
Red Off Off Flashing The air flow sensor has a problem. Turn the
red projector off, unplug it, and contact Epson for
help.
Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and
contact Epson for help.
158
To Next Page
Loading...
Need help?
General