6. Use the arrow buttons on the projector or remote control to move to the point on the grid that you
want to adjust. Then press Enter. The box will change from a single line to a double-lined square.
7. Use the arrow buttons to correct the distortion in all necessary directions.
Note: You can press Enter to show or hide the image and grid to check the results.
8. Press Esc to return to the previous screen and select another point to correct, if necessary.
9. When you are finished, press Menu to exit.
Parent topic: Image Shape
Related references
Projector Feature Settings - Settings Menu
Related tasks
Displaying a Test Pattern
89
To Next Page
Loading...
Need help?
General