Projecting 43
If you want to turn the projector on again, press the P Power
button.
4. Press up on the blue foot release lever and lower the projector to
retract the front adjustable foot, as shown.
5. Replace the lens cap and unplug the power cord.
6. Turn off and disconnect any equipment plugged into the
projector.
7. If you won’t be using the projector for awhile, store it in the soft
case that came with it or in a protective case.
Foot
caution
To avoid damaging the
projector or lamp, never
unplug the power cord
when the power light is
green or flashing orange.
To Next Page
Loading...
