60 Fine-tuning the Projector
■ Computer 2 Input
Selects the signal from equipment connected to the
Computer2(Component) port. If your image colors look
wrong, try changing this setting from
Auto to one of the
following:
RGB for computer or RGB video sources, or
Component Video for component video sources.
■ Video Signal (composite and S-Video)
Leave this setting at
Auto unless you are using a 60-Hz PAL
system (select
PAL60).
■ Resize (video)
Sets the image’s aspect ratio (ratio of width to height) to
4:3
for letterbox video content and to
16:9 for widescreen video
content.
4. When you’re finished adjusting the signal settings, press
Esc or
Menu.
Customizing Projector Features
The Settings menu lets you customize the way you use the projector,
from adjusting lamp brightness and speaker volume to changing the
shape of the mouse pointer.
1. Press the
Menu button.
2. Select the
Settings menu.
To Next Page
Loading...
Need help?
General