Epson PowerLite 62c - Changing the Images Aspect Ratio

48 Using the Remote Control
4. While the image is enlarged, you can:
■ Use the pointer button to pan about.
■ Press the E-Zoom button to zoom out.
5. When you’re done, press the
ESC button to return to the original
size.
Changing the Image’s Aspect Ratio
If you’re projecting a widescreen format image, you can use the
Resize button on the remote control to change the aspect ratio.
Follow these steps:
1. Press the
Resize button once to change the aspect ratio to 16:9
for widescreen format.
2. Press it again to return to 4:3 aspect ratio.
note
You must be projecting
component, composite, or
S-Video images to change the
aspect ratio.
You can also change the
aspect ratio using the
projector’s Signal menu. See
page 58 for details.