54 Fine-tuning the Projector
4. After highlighting the option you want to adjust, use the
pointer button on the remote control or left or right arrow
buttons on the projector to change the setting. In some cases, you
may have to press the
Enter button to see a sub-screen for
changing the setting.
■ Press the left or right side of the pointer button or the left
or right arrow buttons on the projector to adjust a slider bar.
■ To select from two or more settings, use the pointer
button or arrow buttons to highlight the desired setting, then
press
Enter.
5. Press the
Esc button to return to the previous menu or to close
the menu system if you are at the main menu. Your changes are
saved automatically.
6. Press the
Menu button to exit the menu system.
To Next Page
Loading...
Need help?
General