EasyManuals Logo

Epson PP-100N - Discproducer - DVD Duplicator x2 User Manual

Epson PP-100N - Discproducer - DVD Duplicator x2
174 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #156 background imageLoading...
Page #156 background image
156
Print tray
open/close error
-When the printer tray does not come out-
See “Printer Tray Does Not Come Out” in the PP-100N
Administrator’s Guide.
-When the printer tray does not close-
Remove any remaining discs, turn off the power, and then
turn on the power again.
If the same error message still appears, repair is required.
Please contact Customer Support.
Printer maint.
error
Repair is required.
Please contact Customer Support.
Replace ink
(C,LC,LM,M,Y,K)
The ink in the cartridge is out.
Replace the cartridge of the displayed color. (See
“Changing the ink cartridge” on page 131 in this guide.)
Replace inkpad It is time to replace the ink pad.
Please contact Customer Support. The ink pad cannot be
replaced by the customer.
Stacker 3
installed
Remove Stacker 3, and close the disc cover. Stacker 3 is not
used in Standard Mode/External Output Mode.
Stacker 3
not installed
Load Stacker 3, and close the disc cover. Stacker 3 is used in
Batch Mode.
Stacker 4 full The initialization operation cannot be performed because
Stacker 4 is full.
Remove the discs from Stacker 4.
Stacker 4 open Close Stacker 4.
Stacker full
ST2,ST3,ST4
The disc cannot be ejected because the output stacker is
full. Remove the discs from the output stacker (Stacker 2,
Stacker 3, or Stacker 4).
Too many discs
ST1,ST2,ST3
Remove excess discs so that the height of the discs in the
indicated stacker is below the red line of the stacker, and
then close the disc cover.
Transferred disc
detection error
A disc could not be detected after transfer to a printer or
drive. Turn off the power, and then turn it on again. If the
same error message still appears, repair is required. Please
contact Customer Support.
Wait a moment
and try again
Press the button or CANCEL button. Do not unlock the
disc cover repeatedly within a short time. Wait a moment
before unlocking.
Write error Processing of the job is paused. See “Disc writing problems”
on page 159 in this guide, and after removing the cause of
the error, restart the job. (See “Resuming jobs” on page 115 in
this guide for the job restarting procedure.)
Error Message Remedy
Notification
Sound

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson PP-100N - Discproducer - DVD Duplicator x2 and is the answer not in the manual?

Epson PP-100N - Discproducer - DVD Duplicator x2 Specifications

General IconGeneral
BrandEpson
ModelPP-100N - Discproducer - DVD Duplicator x2
CategoryPrinter
LanguageEnglish

Related product manuals