36
Checking and changing user information
User information is registered by the administrator.
After software installation (see page 25 in this guide) is completed, the user must check the registered user
information and change the password.
Checking user information
1
Log in to EPSON Total Disc Net Administrator.
See “Logging in to EPSON Total Disc Net Administrator” on page 55 in this guide for the login procedure.
2
Click the [User information] tab.
The registered user information is displayed.
• User name: This displays the user name to use when logging in to EPSON Total Disc Net
Administrator.
• Full name: This displays the full name of the user if registered.
• Email address: This displays the email address of the user if registered.
• Authority: This displays “Administrator” if the user is set as an administrator.
Check with the administrator for the initial settings for the user name and password. The
user name and password are necessary for checking and changing the user information.
To Next Page
Loading...
