16
Checking the status of this product using the
indicator light display
This section describes the status of the product using the indicator lights displayed on the control panel.
Indicator light
Flashing/On
Status
Power LED
On The power is on.
When only the power LED is on, the product is on
standby for data.
Flashing Product is being initialized or is shutting down.
When it flashes together with the ERROR LED, there is a
problem on the unit.
BUSY BUSY LED
Flashing
Product is processing a job, is receiving a job, or is
backing up or restoring data.
When the BUSY LED is flashing quickly, a disc is being
ejected, so do not pull out Stacker 4. Discs may be
damaged.
ERROR ERROR LED
On The cover, disc transport system, stacker, drive, or
printer is experiencing an error.
Flashing The unit is experiencing a problem.