Epson R200 - Stylus Photo Color Inkjet Printer - Page 13

EPSON Stylus Photo R200/R210 Revision A
TROUBLESHOOTING Troubleshooting with LED/LCD Indications and Status Monitor 3 Message 13
Following is the Blink timing of each Blink condition.
-- : No change of the LED status
Blink : 0.5sec. on + 0.5sec. off
Blink 2 : 0.2sec. on + 0.2sec. off + 0.2sec. on + 0.4sec. off
Fast Blink : 0.1sec. on + 0.1sec. off
Alternant Blink 1 : Same as Blink
Alternant Blink 2 : Same as Blink
CD/DVD Tray Error
-- On --
This error is detected when "CD/DVD Tray"
cannot be detected while CD/DVD printing.
Fatal error
Off Fast Blink Fast Blink
This error is detected when ;
1. "Carriage Unit" cannot move correctly by the
external force in each operation.
2. "PF Motor" cannot rotate correctly while "PF
Motor" operates.
Table 1-3. LED Indication and STM3
Printer status
LED indication
STM3 message Condition for error detection
Power Paper Ink