Epson R200 - Stylus Photo Color Inkjet Printer - Page 52

EPSON Stylus Photo R200/R210 Revision A
DISASSEMBLY AND ASSEMBLY Disassembly 52
o External View (Cont.)
Figure 2-23. "Carriage Unit" removal (2)
8. Remove the E ring, "Holder, Scale Right" and "Cam, CR, Right" from the
right side of "CR Guide Shaft".
9. Remove the screw (x1) for securing "Bushing, Parallel Adjust, Right". Then,
remove "Bushing, Parallel Adjust, Right".
10. Remove "Fixed Spring, CR Shaft, Right" from the hook of "Frame, Main".
Then, remove "Fixed Spring, CR Shaft, Right" from "CR Guide Shaft".
11. Remove the E ring, the plain washer and the leaf spring for securing "Holder,
Scale, Left".
12. Remove the E ring, the plain washer and the spring washer from the left side
of "CR Guide Shaft". Then, remove "Holder, Scale, Left"
13. Release "Cable, Head" from the hooks (x7) of "Holder, Shaft Unit".
14. Slide "CR Guide Shaft" to the right and pull it out from "Cam, CR, left".
Then, remove "Carriage Unit" and "CR Guide Shaft" together.
15. Pull out "CR Guide Shaft" from "Carriage Unit".
Holder, Scale Left
E Ring
Flat Washer
Leaf Spring
E Ring
Flat Washer
Spring Washer
Holder, Scale, Right
E Ring
Cam, CR,
Right
Bushing,
Parallel
Adjust, Right
C.P.S (P4) 3x6
(6-8kgf•cm)
Fixed Spring,
CR Shaft,
Right
Hook
Cable, Head
Holder, Shaft
Assy.
Hooks
Cam, CR, Left
CR Guide Shaft
Hooks
CR Guide Shaft