Epson RC180 Safety And Installation

1. Safety
RC180 Safety and Installation Rev.18 15
Controller
Location Label Note
Residual voltage exists. To
avoid electric shock, do not open
the cover while the Power is ON,
or for 2 minutes after the Power is
OFF.
A
Residual voltage exists. To
avoid electric shock, do not open
the cover while the Power is ON,
or for 300 seconds after the
Power is OFF.
B
Disconnect and lockout main
power before performing
maintenance and repair.
C
Do not connect the followings to
TP/OP port of RC180.
Connecting to the followings may
result in malfunction of the
device.
OPTIONAL DEVICE dummy
plug, OP500, OP500RC,
JP500,and TP-3**
Refer to 4.2 Connection and
Display Language of Option TP1
and OP1
A
B
C

Epson RC180 Specifications

General

Brand	Epson
Model	RC180
Category	Controller
Language	English