Epson RC700-A Maintenance Manual

Maintenance 8. Maintenance Parts Replacement Procedures
RC700 Series Maintenance Rev.3 57
(9)
RC700:
Remove the five connectors from the DMB.
RC700
-A: Remove the twelve connectors from the DMB.
(10)
R
emove the DMB mounting screws (×14).
(11)
Remove the fan.
Refer to 8.2 Fan.
(12)
Remove the DMB from the chassis.
At this point, be careful not to touch the chassis and other parts.
(13)
Remove the plate fixing the connectors on the front side from the DMB and the DMB-
SUB boards.
RC700
RC700-A
(14)
Remove the DMB
-SUB board from the DMB.
(Mounting screw
×3)

Epson RC700-A Specifications

General

Brand	Epson
Model	RC700-A
Category	Controller
Language	English