Epson RC90 Series - Page 7

RC90 Series Maintenance Rev.1 v
Control System Configuration
This manual explains with the following combinations of Controllers and software.
Robot Controller RC90-B:
RC90-B controller firmware
Ver.7.4.2.0 or later
EPSON RC+ 7.0
Before Ver.7.4.1
!!!
Ver.7.4.2 or later
OK
OK: Compatible All functions of the EPSON RC+ 7.0 and the Controller are available.
!!!: Compatible Connection is OK. We recommend using EPSON RC+7.0 Ver. 7.4.2 or
later.
Manual PDF for this robot system is available from EPSON RC+ 7.0 Ver. 7.0.2

NOTE