Epson RC90 Series - Page 8

vi RC90 Series Maintenance Rev.1
Each Manipulator is compatible from following version.
LS3-B****
RC90-B controller firmware
Ver.7.4.4.2 or later
EPSON RC+ 7.0
Before Ver.7.4.3
!!!
Ver.7.4.4 or later
OK
OK: Compatible All functions of the EPSON RC+ 7.0 and the Controller are available.
!!!: Compatible Connection is OK. We recommend using EPSON RC+7.0 Ver. 7.4.2
or later.
LS6-B****
RC90-B controller firmware
Ver.7.4.3.1 or later
EPSON RC+ 7.0
Before Ver.7.4.2
!!!
Ver.7.4.3 or later
OK
OK: Compatible All functions of the EPSON RC+ 7.0 and the Controller are available.
!!!: Compatible Connection is OK. We recommend using EPSON RC+7.0 Ver. 7.4.2
or later.
LS6-B602S-V1
RC90-B controller firmware
Ver.7.5.0.5 or later
EPSON RC+ 7.0
Before Ver.7.5.0
!!!
Ver.7.5.0 R3 or later
OK
OK: Compatible All functions of the EPSON RC+ 7.0 and the Controller are available.
!!!: Compatible Connection is OK. We recommend using EPSON RC+7.0 Ver. 7.4.2
or later.
LS10-B****
RC90-B controller firmware
Ver.7.4.2.1 or later
EPSON RC+ 7.0
Before Ver.7.4.1
!!!
Ver.7.4.2 or later
OK
OK: Compatible All functions of the EPSON RC+ 7.0 and the Controller are available.
!!!: Compatible Connection is OK. We recommend using EPSON RC+7.0 Ver. 7.4.2
or later.
LS20-B****
RC90-B controller firmware
Ver.7.4.5 or later
EPSON RC+ 7.0
Before Ver.7.4.4
!!!
Ver.7.4.5 or later
OK
OK: Compatible All functions of the EPSON RC+ 7.0 and the Controller are available.
!!!: Compatible Connection is OK. We recommend using EPSON RC+7.0 Ver. 7.4.2
or later.