Epson SC-F9300 series - Page 29

I
Firmly insert the roll core of the media onto the
roll holder.
Note:
If the roll of media has an outer diameter that is
less than 140 mm, the roll core will not reach the
roll holder when raised using the lift lever.
Raise it with your hands, and insert the roll core
into the roll holder.
J
K
Note:
If the roll of media has an outer diameter that is
less than 140 mm, the roll core will not reach the
roll holder when raised using the lift lever.
Raise it with your hands, and insert the roll core
into the roll holder.
L
To ensure that the roll holder is sufficiently
inserted into the roll core, push the top of the
roll holder towards the end of the roll two times.
SC-F9300 Series User's Guide
Basic Operations
29