❏ Make sure the printouts are completely dry before
folding of stacking; otherwise, the color may
change where they touch (leaves a mark). These
marks will disappear if they are separated
immediately and dried; however, they will remain
if not separated.
❏ If you put the printouts in an album before they
are completely dry, they may be blurred.
❏ Do not use a dryer to dry the printouts.
❏ Avoid direct sunlight.
❏ Prevent color distortion while displaying or
storing the printouts by following the instructions
in the paper's documentation.
Note:
Typically, printouts and photos fade over time (color
distortion) due to the effects of light and various
constituents in the air. This also applies to Epson
special media. However, with the correct storage
method, the degree of color distortion can be minimized.
❏ See the documentation supplied with Epson special
media for detailed information on handling the
paper after printing.
❏ The colors of photos, posters, and other printed
materials appear different under different lighting
conditions (light sources
*
). The colors of printouts
from this printer may also appear different under
different light sources.
* Light sources include sunlight, fluorescent light,
incandescent light, and other types.
SC-P20000 Series/SC-P10000 Series User's Guide
Introduction
24
To Next Page
Loading...
Need help?
General