Epson SC-S60600 Series - Basic Operations

Other maintenance
When to perform Operation
When using SC-S80600 Series/SC-S60600
Series/SC-S40600 Series
❏ Once every three weeks
❏ Before the start of daily print work
(WH/MS only)
*1
Shaking ink cartridges
U “Shaking” on page 35
When using SC-S80600L Series/
SC-S60600L Series
❏ When LED lamp on ink unit flashes
blue (once every three weeks)
❏ Before the start of daily print work
(WH/MS only)
*1
Shaking Ink Supply Units
U “Shaking” on page 37
❏ When checking if nozzles are clogged
❏ When checking which colors are
clogged
❏ Horizontal stripes or tint unevenness
(banding) are appeared
Checking for clogged nozzles
*2
When a clog is found after checking for
clogged nozzles
Head Cleaning
U “Head Cleaning” on page 57
When the printer will not be used for an
extended period (and switched off)
Pre-Storage Maint.
U “Long-term Storage (Pre-storage Maintenance)” on page 47
When a greasing message is displayed on
the control panel
Applying the supplied grease to the carriage rod
*2
*1 When 10 color mode is selected on SC-S80600 Series/SC-S80600L Series.
*2
Details U User's Guide (Online Manual)
SC-S80600 Series/SC-S80600L Series/SC-S60600 Series/SC-S60600L Series/SC-S40600 Series Operator's Guide
Maintenance
25