How to fix Epson SC-S60600 Printer that does not turn on?
If your Epson printer does not turn on, ensure the power cable is securely plugged into the printer. Also, check if your outlet works by connecting another electric product's power cable to it.
What to do if I cannot print under the network environment on Epson printer?
If you can't print under the network environment, connect the Epson printer directly to the computer using a USB cable, and then try to print. If you can print via USB, there are some problems on the network environment.
What to do if my Epson SC-S60600 Printer sounds like it is printing, but nothing prints?
If your Epson printer sounds like it's printing but nothing comes out, first ensure the interface cable is securely plugged into both the computer and the printer. Also, verify that the cable specifications match those required by both devices. Try printing a test pattern. Plug the USB cable directly into your computer's USB port, and make sure the USB hub is correctly recognized by the computer.
Why is the print quality of my Epson SC-S60600 Printer poor?
If the print quality from your Epson printer is poor, uneven, too light or dark, grainy, or the tone differs, try replacing the old ink cartridge with a new one. You can also try printing a test pattern. If the print results are blurred or smudged or the ink clots, raise the temperature. Finally, confirm that the media settings in the software RIP or on the printer match the media you are using.
How to fix Epson SC-S60600 Printer when test pattern does not print correctly?
If the test pattern on your Epson printer does not print correctly, select Media Adjust - Head Alignment in the media settings to adjust a print head misalignment that occurs during printing. You can also print a test pattern again after performing head cleaning. Select Media Adjust - Feed Adjustment in the media settings to make adjustment based on the target media. Also, perform steps to take when the printer has not been used for a long time.
How to fix Epson printer with misaligned print head?
If the print head on your Epson printer is misaligned, select Media Adjust - Head Alignment in the media settings to adjust a print head misalignment that occurs during printing.
What to do if my Epson SC-S60600 displays 'Ink Low'?
If 'Ink Low' is displayed on the control panel of your Epson printer, it's recommended to replace the ink cartridge with a new one.
What to do if media is wavy in Epson printer?
If the media is wavy, cut and remove the curled, folded, curved, creased, or waved part. Check whether the correct options are selected for Side Margin and Print Start Position in the setup menu.
General| Print Resolution | Up to 1440 x 1440 dpi |
|---|---|
| Maximum Print Width | 64 inches |
| Ink Colors | Cyan, Magenta, Yellow, Black |
| Media Types | Vinyl, Banner, Canvas, Paper, Film |
| Connectivity | Ethernet |
| Operating Systems | Windows |
| Power Consumption | 1.5 kW |
Step-by-step guide for loading, setting, and managing media.
Procedures for easy media setup and registering custom settings.
Performing auto and manual adjustments for print head alignment and feed.
Procedures for cleaning print heads, caps, and handling ink cleaner.
Detailed guide for performing head cleaning at different levels.
Explains common messages and troubleshooting steps for errors.
Addresses poor print quality, banding, and incorrect color tone problems.
To Next Page
