Epson SC-S60600 Series User Manual

M
Hold the pad of the tool as described in step 7,
and slide the grease tool back and forth twice.
Next, apply grease to carriage rod B.
Greasing procedure for carriage
rod B
A
Hold a new pad B firmly against the gray part
of the rod as shown in the illustration, and
smoothly slide it from the right end to the left
end to wipe off stains on the rod.
Repeat this action four times.
c
Important:
Do not slide pad B back and forth.
If you slide the tool back and forth, dust will
be moved to the print head stand-by position
and a malfunction may occur.
B
Apply grease to the new pad B as described
below.
Replace pad B used in step 1. These should not
be reused.
(1) Insert the tip of the cleaning stick fully into
the container, and twist it 2 to 3 times to get
enough grease on the stick.
(2) Apply grease to new pad B.
SC-S80600 Series/SC-S60600 Series/SC-S40600 Series User's Guide
Maintenance
85

Epson SC-S60600 Series Specifications

General

Brand	Epson
Model	SC-S60600 Series
Category	Printer
Language	English