Epson SC-S60600 Series User Manual

E
Unlock the two casters at the front.
c
Important:
When performing level adjustment using the
adjusters, make sure you raise the adjusters
above the casters before trying to move the
printer. Moving the printer without raising
the adjusters could cause malfunction. You
need the spanner supplied to adjust the
adjusters.
1. Loosen the nut on the top of the adjuster.
2. Turn the nut on the bottom
counter-clockwise.
3. Check that it is above the caster.
F
Move the printer.
c
Important:
Use the casters on the dedicated printer
stand to move the printer indoors a short
distance over a level floor. They can not be
used for transport.
Post-Move Setup
After moving the printer, follow the steps below to
ready it for use.
A
Check that the location is appropriate for
installation, and set up the printer.
U Setup Guide
If you do not have the Setup Guide, contact
your dealer or Epson Support.
U “Where To Get Help” on page 123
B
Plug in the power cables and turn the printer on.
U Setup Guide
C
Perform a nozzle check to check for clogged
nozzles.
U “Printing nozzle check patterns” on
page 77
D
Perform Media Adjust in the setup menu, and
check the print quality.
U “Media Adjust” on page 47
Transport
Before transporting the printer, contact your dealer or
Epson Support.
U “Where To Get Help” on page 123
SC-S80600 Series/SC-S60600 Series/SC-S40600 Series User's Guide
Appendix
118

Epson SC-S60600 Series Specifications

General

Brand	Epson
Model	SC-S60600 Series
Category	Printer
Language	English