Item Parameter Explanation
Pre-Storage Maint.
WH
*2
Always perform pre-storage maintenance if the printer will not be used
for one month or more (and switched off.)
See the following for more information.
U “Long-term Storage (Pre-storage Maintenance)” on page 79
MS
*2
All Nozzles
Change Color Mode
*2
9 Color Items displayed differ depending on the mode currently selected.
Switching between WH ink and MS ink changes the spot color ink used.
If you do not print using WH/MS inks for the specified period of time,
switch to 9 Color mode to avoid consuming WH/MS inks.
For details on execution conditions and procedure, see:
U “Change Color Mode (SC-S80600 Series only)” on page 80
10 Color (WH)
10 Color (MS)
Grease Carriage Rod Yes
When Apply secondary carriage rod grease. See manual. is displayed
on the control panel screen, select Yes to apply grease to the carriage
rod.
U “Applying Grease to the Carriage Rod” on page 83
No
The Printer Status Menu
These items track printer use and settings.
Item Parameter Explanation
Level Ink Displays the current remaining amount for the selected item as
an icon.
Waste ink bottle
Wiper Unit
Print Status Sheet Print Print a status sheet showing current printer settings, and the
status of periodic replacement parts. Use this option to view a
variety of information about the printer on a single sheet and
help schedule the periodic replacement of parts.
Firmware Version XXXXXXX,X_XX,XXXX View the printer Firmware Version.
SC-S80600 Series/SC-S60600 Series/SC-S40600 Series User's Guide
Using the Control Panel Menu
102
To Next Page
Loading...
Need help?
General