Menu List
The following items and parameters can be set and executed in the Menu. See the reference pages for more details
on each item.
Media Setup
For more information on these items, see U “The Media Setup Menu” on page 93.
Item Parameter
Feed To Cut Position Sends the end of the print to the cutter groove
Easy Media Setup Registers new media settings easily
Media Remaining
Print Remaining Length Print
Length OFF, 1.0 to 100.0 m
Remaining Alert 1 to 15 m
Customize Settings
Current Settings
1 to 30 (media setting number)
Setting Name Up to 22 half-size characters
Media Type Adhesive Vinyl, Banner, Film, Canvas, Textile, Paper/Others
Media Adjust
Auto Print
Manual
Feed Adjustment Standard, 500mm Pattern
Head Alignment Print
Advanced Settings
Platen Gap 1.6,2.0,2.5
Heating & Drying
Heater Temperature Pre-heater/platen heater: OFF, 30 to 50°C
After heater: OFF, 30 to 55°C
Drying Time Per Pass 0 to 10 sec
After Heater Feed Mode 1, Mode 2, OFF
Additional Dryer ON, OFF
Media Tension Lv1, Lv2, Lv3, Lv4
Media Suction 0 to 10
SC-S80600 Series/SC-S60600 Series/SC-S40600 Series User's Guide
Using the Control Panel Menu
88
To Next Page
Loading...
Need help?
General