Epson SC-S60600 Series User Manual

Using ink cleaner
Only use ink cleaner to clean the parts indicated in the
manual. Using ink cleaner on other parts of the
printer could damage the product.
Before starting this procedure, be sure to read the
following:
U “Precautions regarding maintenance” on page 59
A
Put the cup supplied with the ink cleaner on
the metal tray, and pour approximately 10 ml
of ink cleaner into the cup.
B
Dampen the cleaning stick with ink cleaner.
Do not allow ink cleaner to drip from the
cleaning stick.
When dampening a clean-room wiper with ink
cleaner, use ink cleaner poured into a cup.
c
Important:
❏ Do not reuse ink cleaner. Using dirty ink
cleaner will make staining worse.
❏ Used ink cleaner, cleaning stick, and
clean-room wipers are industrial waste.
Dispose of them in the same way as for
waste inks.
U “Disposal of used consumables” on
page 75
❏ Store ink cleaner at room temperature
out of direct sunlight.
❏ After using the ink cleaner, be sure to
first close the inner cap and then the
outer cap. Failure to securely close these
caps may cause a leakage or
volatilization of the ink cleaner.
Moving the Print Head
This section describes how to move to cleaning
position of the print head.
c
Important:
Be sure to follow the steps below when positioning
the print head. Moving the print head manually
could cause malfunction.
Buttons that are used in the following settings
SC-S80600 Series/SC-S60600 Series/SC-S40600 Series User's Guide
Maintenance
61

Epson SC-S60600 Series Specifications

General

Brand	Epson
Model	SC-S60600 Series
Category	Printer
Language	English