What You’ll Need
Prepare the following items before beginning regular
cleaning and consumable replacement.
When the supplied parts have been completely used,
purchase new consumables.
Prepare dedicated parts for this printer when replacing
ink cartridges/ink supply units or performing
maintenance.
U “Information on Maintenance Items” on
page 49
If your gloves have worn out, prepare commercially
available nitrile gloves.
Protective eyewear (available in the market)
Protects your eyes from ink and ink cleaner.
Mask (available in the market)
Protects your nose and mouth from ink and ink cleaner.
Maintenance Kit (supplied with the printer)
For general cleaning.
The following items are in the kit.
A Gloves (x12)
B Cleaning sticks (x20)
C Clean-room wipers (x100)
D Tweezers (x1)
Ink cleaner (supplied with the printer)
Use when wiping ink stains.
Usage methodU “Using Ink Cleaner” on page 28
A metal tray (supplied with the printer)
Use when putting cleaning tools, removed
consumables, or ink cleaner moved in the container
supplied with the printer.
c
Important:
If the used cleaning stick, etc. are directly put on the
printer, it may cause a deformation from the
characteristics of the ink cleaner.
Precautions regarding
maintenance
Note the following points when cleaning and replacing
parts.
Caution:
❏ Store ink cartridges, Cleaning Cartridge, ink
cleaner, grease, and waste ink in a location out
of reach of children.
❏ During maintenance, wear protective clothing,
including protective eyewear, gloves, and a
mask.
Should ink, waste ink, ink cleaner, or grease
contact your skin or enter your eyes or mouth,
take the following actions:
❏ If fluid adheres to your skin, immediately
wash it off using large volumes of soapy
water. Consult a physician if the skin
appears irritated or is discolored.
❏ If fluid enters your eyes, rinse immediately
with water. Failure to observe this
precaution could result in bloodshot eyes or
mild inflammation. If problems persist,
consult with a physician.
❏ If fluid enters your mouth, consult a
physician immediately.
❏ If fluid is swallowed, do not force the person
to vomit, and consult with a physician
immediately. If the person is forced to
vomit, fluid may get caught in the trachea
which can be dangerous.
❏ After replacing the Waste Ink Bottle or using
the ink cleaner, wash your hands and gargle
thoroughly.
SC-S80600 Series/SC-S80600L Series/SC-S60600 Series/SC-S60600L Series/SC-S40600 Series Operator's Guide
Maintenance
26
To Next Page
Loading...
Need help?
General