Settings item Settings value Explanation
USB
Auto
*
Normally, leave the setting as Auto. If HP-GL/2 or HP RTL print data is sent
from a CAD application or plotter, this is automatically determined, and
switched to HP-GL/2 mode.
If HP-GL/2 mode printing is not carried out normally, or if normally printing
in HP-GL/2 or HP RTL, set as HP-GL/2.
HP-GL/2
Network
Auto
*
HP-GL/2
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Using the Menu
150
To Next Page
Loading...
