Settings item Settings value Explanation
Universal Print Settings
Paper Source
Roll Paper
*
Select the paper source. If the paper is not loaded as in the set paper source,
then an error will occur during printing.
Cut Sheet(1 sheet)
Quality
Standard
*
Select the print quality. Standard will print with the quality mode
appropriate for the Paper Type setting for the paper selected in Paper
Source.
Speed
Fine
Super Fine
Draft
Color Mode
Color
*
Specify whether to print in color or switch to black and white and then print.
Black/White
Page Margins option
Clip By Margins
*
Depending on the base output size setting, adds the value selected for the
page margin (area of
in the following illustration) inside the hard clip
area of the PS command of the data or the size selected for base output size
(area of
in the following illustration). When there is a print object in the
margin section, it is clipped and not printed.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Using the Menu
151
To Next Page
Loading...
Need help?
General