Epson SS-300 - 9-3 Noting Pitch and Stride While Running

110
Chapter 9
Usage Guide (Screen Settings According to Your Needs)
9-3 Noting pitch and stride while running (SS-700/SS-500 only)
When running fast, there are two points to consider; the number of strides you take
(Pitch) and the length of your stride (Stride). If you want to note your pitch and stride
while running, we recommend using the following screen.
Screen settings (changing from the default settings)
Change the middle and bottom sections of screen 3 from their default settings.
Chronograph screen
Screen 1
Distance (Dist.)
Split time (Spl)
Pace
Chronograph screen
Screen 3
Chronograph screen
Screen 2
Distance (Dist.)
Distance (Dist.)
Time
Pitch
Pace
Stride
Screen 1 Screen 2 Screen 3
Top row Distance (Dist.) Distance (Dist.) Distance (Dist.)
Middle row
Split time (Spl) Time Pitch
Bottom row Pace Pace Stride
: Change from default setting
To measure pitch and stride, set [Stride] to [ON] ( P. 60).
Checking the measurement screen
Press to change to screen 3 and then run. You can check the pitch and stride while
running.