EasyManua.ls Logo

Epson SS-300 - 11-3 Product Specifications

Epson SS-300
142 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
128
Chapter 11
Maintenance
11-3 Product specications
Check each item.
Device specications
Specications SS-700 SS-500 SS-300
Size (thickness) 15.7 mm 13.0mm 14.7mm
Weight 61 g 49g 59g
Waterproong function 10 atm 5 atm
Operating
time
GPS-on, Stride ON/OFF, HR-OFF 14 hours
GPS-on, Stride ON/OFF, HR-ON 10 hours -
Time display Five weeks
Operating temperature -5 to 50˚C
Possible memory time 100 hours
Maximum number of laps 1000
Heart rate measurement (using the HR sensor)
-
Pitch/stride measurement
-
Measuring distance/pace with the stride sensor
-
Display
range
Distance
0.00 to 999.99 km / 0.00 to 999.99 mi
Pace/Lap pace/Average pace
0'00'' to 30'00''/km / 0'00'' to 45'00''/mi
Speed
0.0 to 999.9 km/h / 0.0 to 999.9 mi/h
Split/Lap time
00'00'' to 99:59'59''
Pitch
0 to 255 spm -
Stride
0 to 200 cm / 0 to 99 inch -
Calories burnt
0 to 9999 kcal
Altitude*²
-500 to 9999 m / -1500 to 29999 ft
HR/Lap HR/Average HR
30 to 240 bpm
-
Guide time
-9:59'59'' to 9:59'59''
Guide distance
-99.99 to 99.99 km / -99.99 to 99.99 mi
Exercise intensity
1.0 to 18.0 METS
*1: You can purchase the HR sensor set for the SS-500 as an optional item.
*2: The altitude is measured using the GPS signal. There may be large errors in altitude measurement values depending
on the GPS environment.

Table of Contents

Related product manuals