Epson SS-300 - 8-4 Auto Light Settings

81
Chapter 8
About Settings
8-4 Auto light
This function automatically turns on the light.
You can turn this function on or o.
The light automatically turns on under the following conditions.
· When measuring laps using the auto lap function.
· When stopping or starting using auto pause.
· When changing between interval and rest using the Interval function, and when
closing the function.
· When an alarm is triggered (distance alarm, pace alarm, or HR alarm).
· When measuring
(Start/Stop) or (Lap) is pressed.
1
Press to display the [Menu].
2
Use / to highlight [Settings], and then press .
The [Settings] function selection screen is displayed.