Epson SS-300 - 3-3 Using the Exercise Screen

38
Chapter 3
Using the Exercise Function
3-3 Using the exercise screen
When you change to the exercise screen, the device performs a GPS search ( P. 24).
Make sure you perform the search outside with no obstructions overhead.
1
Press to display the [Menu].
2
Use / to highlight [Exercise], and then press .
When the GPS search is complete, the exercise screen is displayed.
If the GPS search has not been completed, the exercise screen is not displayed.
Exercise screen
· It usually takes within two minutes to complete a GPS search. If the GPS search does not
nish after three minutes or more, you may be in an environment where GPS signals
cannot be received. Select [Cancel] to stop the search, and then try again in another
location.
· If the GPS search does not nish after 10 minutes, the search is stopped and the [Menu]
screen is displayed.
· See "Setting GPS (GPS search)" (
P. 24) for more details on making a GPS search.
· If 60 minutes pass without any measurements being made (if the device is stopped or
before measuring), the [Menu] screen is displayed.