EasyManuals Logo

Epson ST-C2100 User Manual

Epson ST-C2100
258 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #222 background imageLoading...
Page #222 background image
222
Related tasks
Refilling the Ink Tanks
Selecting Additional Layout and Print Options - Windows
Selecting Printing Preferences - Mac
Loading Paper in the Rear Paper Feeder
Selecting Basic Print Settings - Mac
Selecting Basic Print Settings - Windows
Blurry or Smeared Printout
If your printouts are blurry or smeared, try these solutions:
• Make sure your paper is not damp, curled, old, or loaded incorrectly in your product.
• Slide the edge guides to the edges of the paper.
• Use a support sheet with special paper, or load special paper one sheet at a time.
• Make sure your paper meets the specifications for your product.
• Use Epson papers to ensure proper saturation and absorption of genuine Epson inks.
• Make sure the paper type setting in your product software matches the type of paper you loaded.
• Make sure you loaded the printable side of the paper correctly for your product.
• If you are printing on thick paper or envelopes, make sure you select the appropriate settings. In
Windows, you can also try selecting Short Grain Paper in Extended Settings.
• Remove each sheet from the output tray as it is printed.
• Avoid handling printouts on glossy paper right after printing to allow the ink to set.
• Turn off any high speed settings in your product software.
• When vertical banding appears or the paper is smeared, clean the paper path.
• When horizontal banding appears or the top or bottom of the paper is smeared, load paper in the
correct direction and slide the edge guides to the edges of the paper.
• If you printed on the wrong side of photo paper, clean the paper path.
• If you print on both sides of a sheet of paper, smudges may appear on the reverse side of heavily
saturated or dark images. If one side of a sheet will contain a lighter image or text, print that side first.
Make sure the ink has dried before reloading the paper to print on the other side. Adjust the density
and/or ink drying time settings.
• Lower the copy density setting on the product control panel.

Table of Contents

Other manuals for Epson ST-C2100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson ST-C2100 and is the answer not in the manual?

Epson ST-C2100 Specifications

General IconGeneral
FunctionsPrint, Copy, Scan, Fax
Maximum Scan Resolution1200 x 2400 dpi
ConnectivityUSB 2.0, Ethernet, Wi-Fi, Wi-Fi Direct
Mobile PrintingApple AirPrint, Mopria
Paper Sizes SupportedA4, A5, A6, B5, Legal, Letter, Envelopes
Paper Capacity250 sheets
Duplex PrintingYes

Related product manuals