1-18
18 | Setting Up the Printer On a Network
4. Double-click User’s Guide and Network Guide and wait while the
guides are installed.
5. Double-click
Stylus Pro 3800 Driver.
6. Enter your password and follow the on-screen instructions to install
your software.
7. Enter your password again and follow the on-screen instructions to
install the EPSON LFP Remote Panel.
8. Enter your password again and follow the on-screen instructions to
install EpsonNet Config.
9. Restart your Macintosh when prompted.
10. Click
Exit to close the installer.
Remove the printer software CD-ROM and continue with the instructions
on page 19 for Mac OS X 10.4.x or page 20 for Mac OS X 10.3.9 to add
your printer.
sp3800Guide.book Page 18 Monday, January 29, 2007 11:08 AM
To Next Page
Loading...
