3-57
Printing with Epson Drivers for Macintosh | 57
Choosing Expansion Settings
If you need to adjust the amount of image enlargement when printing
borderless photos, select an
Auto Expand paper size and follow the
steps below:
1. Select
Expansion from the pop-up menu. You see a screen like this one:
2. If necessary, adjust the Expansion slider to choose the
Min, Mid, or
Max setting.
The
Min setting retains the entire image in your print, but there may be
a small white border on the edges of the print.
Max expands the image
to ensure that there are no unprinted edges, but the edges of the image
may be cropped.
sp3800Guide.book Page 57 Monday, January 29, 2007 11:08 AM
To Next Page
Loading...
