2-32
32 | Handling Paper and Other Media
Choosing the Correct Paper Path
The printer provides three paths for loading media:
• Auto sheet feeder
(multiple sheets)
• Rear manual feed slot
(one sheet only)
• Front manual feed slot
(one sheet only)
It’s very important to use the correct paper path and to load the correct
number of sheets. For example, you can load only one sheet at a time in the
front and rear slots, and poster board can be inserted only in the front slot. If
you need to make sure the paper stays flat, use the rear manual slot or the
front slot.
sp3800Guide.book Page 32 Monday, January 29, 2007 11:08 AM
To Next Page
Loading...
