3-58
58 | Printing with Epson Drivers for Macintosh
Creating a Custom Preset and Printing
Once you’ve selected the correct settings for your print job, create a
custom preset. This will save time when you use the same
profile/printer/ink/media combination for future print jobs.
1. Select
Summary from the pop-up menu.
2. After verifying that your settings are correct, select
Save As from the
Presets pop-up menu.
You see the following screen:
3. Type a name for your custom preset, and click
OK.
4. When you’re ready to print, click the Print button.
See page 61 for instructions on monitoring your print job.
Note: If you check each
pop-up menu, go through
them carefully from top
to bottom. Avoid cycling
through them repeatedly,
or you may lose your
settings.
Caution: Do not open
and close the Presets
pop-up menu without
typing a name, or you will
lose your settings.
sp3800Guide.book Page 58 Monday, January 29, 2007 11:08 AM
To Next Page
Loading...
