5-93
Maintaining and Transporting the Printer | 93
9. Close the ink cover and press it until it clicks.
When you see
READY on the LCD, the printer is ready to print.
Performing Additional Maintenance Tasks
In addition to running a power cleaning cycle, you can use the Maintenance
menu to switch between Matte Black and Photo Black, set the printer’s date
and time, and adjust the contrast on the LCD screen.
The printer also provides a maintenance mode which lets you change the
printer’s defaults and run special procedures.
sp3800Guide.book Page 93 Monday, January 29, 2007 11:08 AM
To Next Page
Loading...
