1-25
Setting Up the Printer On a Network | 25
7. Do one of the following:
• If your network uses a DHCP server to configure your network
devices’ IP settings automatically, enter the printer’s Print Server
Name (shown on page two of the network status sheet) in the
Printer Name or IP Address text box. Then click Next.
• If you configured the Printer’s IP settings manually, enter the
printer’s IP Address (shown on page one of the network status sheet)
in the
Printer Name or IP Address text box. Then click Next.
sp3800Guide.book Page 25 Monday, January 29, 2007 11:08 AM
To Next Page
Loading...
