2-41
Handling Paper and Other Media | 41
Also keep the following in mind when using the front slot:
• Load only one sheet at a time and make sure the printable side is
face-up.
• If the paper is wider than 16.5 inches, use the auto sheet feeder or rear
slot if allowed for your paper type; see page 32 for details.
• If PAPER SIZE CHECK is set to OFF on the LCD, you cannot load
paper in the front manual feed slot. Use the printer’s menu system to
turn this setting on. (See your on-screen User’s Guide for more
information.)
1. Make sure the printer is on and
READY appears on the LCD.
2. Press the front cover to release it and open the output tray.
3. Press the front tray as shown to pop it out.
sp3800Guide.book Page 41 Monday, January 29, 2007 11:08 AM
To Next Page
Loading...
