28 Scanning a Photo or Document
Note:
If you need to scan a thick document, you can remove the document cover. See
page 7.
2. Close the cover gently so you don’t move the original.
3. If you are scanning from an application, start your application. Then open the
File menu and choose Import or Acquire and select EPSON Stylus CX3500
or EPSON Stylus CX4500. If EPSON Scan is set to the default Full Auto
Mode, it starts previewing your image. To switch modes, click the
Pause
button at the bottom of the screen. Then go to step 4.
If you are scanning directly from your desktop, do one of the following:
■ In Windows, select Start > All Programs or Programs >
EPSON Scan > EPSON Scan
.
■ On a Macintosh, double-click EPSON Scan in the Applications folder.
If you see the File Save Settings
window, choose the location where
you want to save your scanned file and
type a name for it in the Prefix box.
Select a file format in the Image
Format box. Then click
OK. The
image is scanned and you see its icon
in the open folder.
4. To change modes, select
Home Mode
or
Professional Mode from the Mode pull-
down menu at the top of the screen.
Note:
EPSON Scan starts in the mode you used last,
but you can change the mode at any time.
4049978_b0_00.book Page 28 Thursday, July 22, 2004 3:47 PM
To Next Page
Loading...
Need help?
General