20 Maintaining Your Epson Stylus CX
1. Make sure the Epson Stylus CX is on.
2. Make sure that the document cover is closed, then open the scanner.
3. Press and release the
B ink button. The ink cartridge holder moves to the
check position and the P
On and B ink lights flash. If one of the cartridges is
low or empty, the Epson Stylus CX moves that cartridge to the
_ ink out
mark.
Note: Don’t hold down the B ink button for more than 3 seconds, or the printer will
start to clean the print head.
Caution: Don’t move the print head by hand; this may damage the Epson Stylus
CX. Always press the
B ink button to move the print head.
Caution: Do not open
the scanner when the
document cover is open.
To Next Page
Loading...
