Epson Stylus Office T1100 - 4.4.14 Front Paper Guide; Paper EJ Roller; Front Paper Guide Pad Tray

WorkForce 1100/Epson Stylus Office T1110/B1100/T1100/Epson ME Office 1100 Revision A
Disassembly And Assembly Disassembling the Printer Mechanism 110
Confidential
4.4.14 Front Paper Guide / Paper EJ Roller /
Front Paper Guide Pad Tray
1. Remove the Paper EJ Frame Assy. (p.106)
2. Release the Carriage Lock, and move the Carriage Unit to the center. (Refer to 4.1.5
Locking/Releasing the Carriage (p.65).)
3. Remove the EJ Grounding Spring from the Main Frame with tweezers.
Figure 4-119. Removing the EJ Grounding Spring
Align the positioning two holes on the Main Frame with the two
guide pins on the Ink System Unit.
Figure 4-118. Reinstalling the Ink System Unit
Positioning holes
Main Frame
Guide pins
Ink System Unit
Referring to Figure 4-120, correctly install the EJ Grounding
Spring.
Figure 4-120. Reinstalling the EJ Grounding Spring
EJ Grounding
Spring
www.printerwhy.net
高速行式打印机 http://www.lineprinter.com.cn/
_______________________________________________________________________________________
_______________________________________________________________________________________
打印机维修论坛 http://www.printerwhy.net/ 打印机驱动下载 http://www.printerwhy.com/