Epson Stylus Office T1100 - 4.2.5 Panel Unit

WorkForce 1100/Epson Stylus Office T1110/B1100/T1100/Epson ME Office 1100 Revision A
Disassembly And Assembly Removing the Housings 69
Confidential
4.2.5 Panel Unit
1. Open the Printer Cover.
Figure 4-10. Removing the Panel Unit (1)
 Align the positioning tabs (one each on the left/right) with the
positioning holes (one each on the left/right) on the Upper
Housing.
 Align the positioning tabs (three each on the left/right) with the
positioning holes (three each on the left/right) on the Decoration
Plate Left/Right and the Lower Housing.
Figure 4-9. Reinstalling the Rear Housing
Positioning tab
Hook this to the
Upper Housing
Positioning tab
Panel Unit
Printer Cover
www.printerwhy.net
高速行式打印机 http://www.lineprinter.com.cn/
_______________________________________________________________________________________
_______________________________________________________________________________________
打印机维修论坛 http://www.printerwhy.net/ 打印机驱动下载 http://www.printerwhy.com/